Full Body Harnesses
pbh01_front
Move your mouse over image or click to enlarge
pbh01_front pbh01_back tds-04-pbh01-is5-17
The PBH01 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall. Certified fall arrest points are clearly marked with an A, the rear “D” is the only point of anchorage on the PBH01. For ...Read more

Single Point Harness

  • 100% Polyester Webbing
  • Trapezoidal Buckles
  • Dorsal Fall Arrest Attachment
  • Back Support
  • EN 361

Part #:

PBH01

100% Polyester Webbing
Trapezoidal Buckles
Dorsal Fall Arrest Attachment
Back Support
EN 361

Weight: 1 lb

+

The PBH01 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.

Certified fall arrest points are clearly marked with an A, the rear “D” is the only point of anchorage on the PBH01.

For fall arrest the PBH01 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.

When used for fall arrest a pre-determined rescue plan must be a part of your safe system of work.

Recommended minimum anchor strength – 12kN.

 

  • Label Pouch
  • Fall Indicating Tabs
  • Leg Loops
  • Attachment Points: Single rear ‘D’ fall arrest attachment point (Dorsal)
  •  Fittings: Carbon steel, black powder-coated
    Stainless steel (Optional)
    Dielectric plastic coated pressed steel (Optional)
  •  Webbing: Polyester webbing, water repellent & uv resistant
  •  Padding: Optional detachable shoulder yoke - thermo formed
  •  User Weight: 150kg Maximum [Including tools and equipment]

Our entry level fall arrest safety harness with one rear dorsal attachment point.

Lightweight, easy to don with four points of adjustment to ensure a better fit. Available with carbon steel, stainless steel or plastic coated pressed steel dielectric fittings, this harness is suitable for fall arrest via the rear ‘D’ connection.

TDS-04-PBH01-IS5-3

ATTACHMENT POINT

The rear “D” ring is safe to connect to any EN compliant fall protection system.

TDS-04-PBH01-IS5-4

REINFORCED WEBBING

Potential stress points are reinforced for an extra level of safety and durability.

TDS-04-PBH01-IS5-5

LABEL POUCH

All individual Harness information is kept securely inside the label pouch for easy reference.

TDS-04-PBH01-IS5-6

TRAPEZOIDAL BUCKLES

Angled buckles ensure that harness webbing follows the contours of the body for a more comfortable and secure fit.

TDS-04-PBH01-IS5-7

FALL ARREST INDICATOR

Fall arrest indicating tabs allow the user to easily and confidently determine if the harness has been subjected to fall forces.

TDS-04-PBH01-IS5-8

END STOPS

Webbing ends are finished with a tactile, branded rubber end stop.

TDS-04-PBH01-IS5-9

CONTRAST STITCHING

Contrast stitching is used for easy inspection, prior to donning.

 

100% Polyester Webbing
Trapezoidal Buckles
Dorsal Fall Arrest Attachment
Back Support
EN 361