Horizontal Lifelines

puresafety menu logo

English Spanish
Quote Cart
beamguard-plain-
Move your mouse over image or click to enlarge
beamguard-plain- beamguardiw
passthrough
Move your mouse over image or click to enlarge
The Guardian Fall Protection Beamguard HLL Stanchion can be used in combination with any of Guardian’s rope HLL kits, cable HLL kits, or Absorbinator HLL Systems. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the Beamguard has th ...Read more

Beamguard HLL Stanchion

  • Durable and reusable
  • Use in combination with rope or cable HLL system
  • 300’ recommended maximum span length
  • Install HLL system either parallel with or perpendicular to I-beam
  • https://bit.ly/2eZIMTv
  • https://bit.ly/2dvFjqh
  • ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
  • Powder-coated steel
  • 5,000 lbs.

Part #:

04702

Connector Type
Durable and reusable
Use in combination with rope or cable HLL system
300’ recommended maximum span length
Install HLL system either parallel with or perpendicular to I-beam
https://bit.ly/2eZIMTv
https://bit.ly/2dvFjqh
ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
Powder-coated steel
5,000 lbs.


+

The Guardian Fall Protection Beamguard HLL Stanchion can be used in combination with any of Guardian’s rope HLL kits, cable HLL kits, or Absorbinator HLL Systems. Able to accommodate up to two workers between each set of stanchions (maximum stanchion spacing is 60’), the Beamguard has three base size options to allow for installation onto a variety of beam sizes. A Pass-Through Top Accessory is also available to facilitate 100% tie-off when transitioning between spans.

Base size compatibility:

Small: Thickness: Up to 1.25”. Width: 4” – 13.75”
Intermediate: Thickness: Up to 2.125”. Width: 4” – 19.75”
Large: Thickness: Up to 3.375”. Width: 4” – 31.75”

Durable and reusable
Use in combination with rope or cable HLL system
300’ recommended maximum span length
Install HLL system either parallel with or perpendicular to I-beam
https://bit.ly/2eZIMTv
https://bit.ly/2dvFjqh
ANSI Z359.1-07, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
Powder-coated steel
5,000 lbs.

Click To Download