Protection
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
lrtaa-2
Move your mouse over image or click to enlarge
Fixed length single or twin leg restraint webbing lanyards with a selection of connectors offer a variety of uses where the user needs to work without the risk of a fall. Note – Lanyard length is measured between the bearing points of the hooks. Exchanging a carabiner for a scaffold hook could le ...Read more

Dual Leg Adjustable Webbing Restraint Lanyard

  • Webbing strength: 22kN - minimum breaking load
  • Maximum Length: LRT - 2 metres LRTA - 4 metres
  • User Weight: 100Kg Maximum
  • Webbing: 25mm Polyester
  • EN 354 & EN 358 (excluding restraint lanyards longer than 2m, which do not claim conformance to EN 354

Part #:

LRT1.0BB

Length
Webbing strength: 22kN - minimum breaking load
Maximum Length: LRT - 2 metres LRTA - 4 metres
User Weight: 100Kg Maximum
Webbing: 25mm Polyester
EN 354 & EN 358 (excluding restraint lanyards longer than 2m, which do not claim conformance to EN 354

Weight: 1 lb

+

Fixed length single or twin leg restraint webbing lanyards with a selection of connectors offer a variety of uses where the user needs to work without the risk of a fall.

Note – Lanyard length is measured between the bearing points of the hooks. Exchanging a carabiner for a scaffold hook could lengthen a lanyard beyond the maximum allowable length under the relevant EN standard.

  •  End Fittings: Alloy or Steel
  •  Adjustable Slider: Aluminum
TDS-98-LR-LRA-IS4-6

25MM POLYESTER WEBBING

Strong and durable with contrast stitching to aid visual inspection.

TDS-172-LRT-IS3-4

TWIN LEG

Twin leg lanyards allow for 100% safe tie off when moving between anchorages.

TDS-98-LR-LRA-IS4-8

PROTECTED LABEL

Label is shrink wrapped to protect the print from daily wear and tear.

TDS-98-LR-LRA-IS4-9

CONNECTOR OPTIONS

A: Alloy Snap Hook B: Alloy Twist Lock Carabiner C: Alloy Scaffold Snap Hook D: Alloy Twist Lock Scaff Hook E: No Fittings

TDS-172-LRT-IS3-7

SLIDING ALLOY ADJUSTER

A simple sliding adjuster enables the user to adjust the lanyard length to suit the work task.

Webbing strength: 22kN - minimum breaking load
Maximum Length: LRT - 2 metres LRTA - 4 metres
User Weight: 100Kg Maximum
Webbing: 25mm Polyester
EN 354 & EN 358 (excluding restraint lanyards longer than 2m, which do not claim conformance to EN 354