Protection
ecoanchor_ii_01a-2
Move your mouse over image or click to enlarge
User Weight: 100kg MAX  Roof Types: EPDM, Mineral Felts, Concrete, metal deck, [Separate document for approved surfaces and angles available on request] The second generation ecoAnchor mobile man anchor has all the key benefits of the original but with many new features and innovations. D ...Read more

ecoAnchor

  • Dimensions: 1.45m x 1.45m x 0.2m [4’9” x 4’9” x 8”]Nominal
  • WeightEmpty: = 11.4kg [25.1lb] Full = 400kg [882lb]
  • Pressure Loading: 2.7kN/m2 [0.42lb/inch2]
  • Puncture Resistance: Meets FED STD 191 part 1520
  • EN795:1996 Class E

Part #:

ECO-MKII

Dimensions: 1.45m x 1.45m x 0.2m [4’9” x 4’9” x 8”]Nominal
WeightEmpty: = 11.4kg [25.1lb] Full = 400kg [882lb]
Pressure Loading: 2.7kN/m2 [0.42lb/inch2]
Puncture Resistance: Meets FED STD 191 part 1520
EN795:1996 Class E

Weight: 1 lb

+
  • User Weight: 100kg MAX
  •  Roof Types: EPDM, Mineral Felts, Concrete, metal deck, [Separate document for approved surfaces and angles available on request]

The second generation ecoAnchor mobile man anchor has all the key benefits of the original but with many new features and innovations. Due to the new manufacturing techniques of hot bonding with stitched and autoclave cured seams there are now no side walls allowing the empty bag to go completely flat.

The ecoAnchor is a totally unique concept using renewable resources for both manufacture and installation. The ecoAnchor is constructed of a lightweight special natural rubber material that holds the bag in a solid form when filled with water. When installed the weight of the water in the ecoAnchor, combined with the friction generated from the rubber material, provides a secure freestanding anchorage. This can easily be installed without the need to carry steel weights traditionally required for this application. When empty, the ecoAnchor weighs just 11.4kg (25.1lb).

Fill & Drain Point

FILL & DRAIN POINT

Combined filling and draining point with one way valve. Filler takes standard hose connectors.

EcoA_Vent_F_Clr-test2

VENT

Corner vent releases air when filling. When the valve releases water the ecoAnchor is ready to use.

ecoAnchor Label

LABEL

Clear and concise labelling states the scope and limitations of use.

Single Edge Seam

WATERTIGHT SEAL

Hot bonded and autoclave cured seam around the edge ensures a watertight seal.

ecoAnchor Swivel Attachment Point

360 DEGREE SWIVEL

Attachment eye rotates 360 degree for correct orientation during use.

ecoAnchor & HLL

HLL ANCHORAGE

Two ecoAnchors can be used as end anchors for a Guardian temporary lifeline system by using either an HLL1 or HLL1W.

EcoA_Drain_Fill_F_Clr (Small)

DRAIN

Empty the bag by unscrewing the drain cap. When almost empty, lift the bag to remove the remaining water.

ecoAnchor Storage step 2

FOLD

Fold twice as shown in photo, carefully expelling any remaining air until flat

Rolling Instruction

ROLL

Roll length ways until compressed into a small roll and secure with fitted straps.

Stowing Instruction

STOW

Stow anchor back into its holdall for easy stowage and transportation.

 

Dimensions: 1.45m x 1.45m x 0.2m [4’9” x 4’9” x 8”]Nominal
WeightEmpty: = 11.4kg [25.1lb] Full = 400kg [882lb]
Pressure Loading: 2.7kN/m2 [0.42lb/inch2]
Puncture Resistance: Meets FED STD 191 part 1520
EN795:1996 Class E