Protection
pbh05_back
Move your mouse over image or click to enlarge
pbh05_back pbh05_front tds-08-pbh05-sit-harness tds-08-pbh05-is6-18
The PBH05 Vantage harness is Guardian’s premium Rope Access harness designed for suspended work tasks. Anchorage: Rear D attachment point (excluding ‘A’ models)Sternum and Ventral attachment points for abseilWaist Belt for work positioning  Fittings: Carbon Steel, Black Powder-CoatedC ...Read more

Five Point Climbing Harness

  • Composite Breathable Shoulder Pad With Elasticated Strap Holders
  • Optional Croll/Chest Ascender
  • Suspension Seat Attachment
  • Click Lock Buckles
  • EN 361, EN 358, EN 813, ANSI Z359.11:2014

Part #:

PBH05

Composite Breathable Shoulder Pad With Elasticated Strap Holders
Optional Croll/Chest Ascender
Suspension Seat Attachment
Click Lock Buckles
EN 361, EN 358, EN 813, ANSI Z359.11:2014

Weight: 1 lb

+

The PBH05 Vantage harness is Guardian’s premium Rope Access harness designed for suspended work tasks.

  • Anchorage: Rear D attachment point (excluding ‘A’ models)
    Sternum and Ventral attachment points for abseil
    Waist Belt for work positioning
  •  Fittings: Carbon Steel, Black Powder-Coated
    Click Lock Buckles and Cam buckles on RD
    Square links on standard (Non RD)
  •  Webbing: Polyester Webbing, Water Repellent & UV Resistant
  •  Padding: Shoulder Yoke - Thermo Formed Airtex
    Belt and Leg Pads
  •  User Weight: 150kg Maximum [Including tools and equipment]

The PBH05 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall. Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning. Side “D” are for work positioning only. The front suspension “D” is to be used for suspended work and when used as a sit harness.

The PBH5X and PBH5X-RD are supplied with two front attachments for attachment of a croll. Two loops located near the front suspension “D” allow the user to safely connect to a suspension seat. Warning! suspension seat attachments must not be used for fall arrest or work positioning purposes or similar EN567 ascending device. Refer to the device instructions for full user instructions.

For fall arrest the PBH05 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN. When used for fall arrest a predetermined rescue plan must be a part of your safe system of work.

Recommended minimum anchor strength – 12kN.

  • Optional Rear D Removal
  • Tool Loop
  • Adjustable Elasticated Leg Extensions

TDS-08-PBH05-IS6-3

ATTACHMENT POINTS

Upper connectivity via dorsal and sternum with ventral and lateral connectivity at the waist.

TDS-08-PBH05-IS6-4

RAPID DON BUCKLES

Optional click lock buckles for quick and simple donning and removal of harness.

TDS-08-PBH05-IS6-5

CAM BUCKLE ADJUSTMENT

Optional cam buckles make harness adjustment very quick and simple.

pbh05-waist-and-leg-pads

NEW WAIST BELT & LEG PADS

New waist belt and leg pads provide support when suspended or work positioning, and includes multiple attachments and tool loops.

pbh05-sit-harness

SIT HARNESS

The shoulder strap can be removed from the harness so that the lower assembly can be used as a sit harness.

TDS-08-PBH05-IS6-8

CHEST ASCENDER/CROLL

Chest Ascender/Croll attachment available for PBH05X variants. Chest ascender/Croll is optional at additional cost [PPE-CROLL].

TDS-08-PBH05-IS6-9

NECK PROTECTOR

Leather patch sewn onto the inside edge of the shoulder yoke for added comfort.

pbh05-shoulder-yoke

SHOULDER YOKE

New wider Thermo Formed Airtex inner layer with Nylon spreader bar.

Composite Breathable Shoulder Pad With Elasticated Strap Holders
Optional Croll/Chest Ascender
Suspension Seat Attachment
Click Lock Buckles
EN 361, EN 358, EN 813, ANSI Z359.11:2014