Protection
tds-11-pbh08-is4-2
Move your mouse over image or click to enlarge
tds-11-pbh08-is4-2 tds-11-pbh08-is4-14
The PBH08 Harness takes our best selling PBH02 full body harness and incorporates a SOLAS approved 150N or 275N floatation device for working at sea, off shore, on water ways or near water hazards. The Vantage harness is lightweight, easy to don with four points of adjustment to ensure a better fit. ...Read more

Two-Point Harness with Life Jacket

  • SOLAS Life Jacket
  • Sternum Fall Arrest Attachment
  • Life Jacket Securing Strap
  • Dorsal Fall Arrest Attachment
  • EN 361, EN 394, EN 399 SOLAS APPROVED

Part #:

PBH08

SOLAS Life Jacket
Sternum Fall Arrest Attachment
Life Jacket Securing Strap
Dorsal Fall Arrest Attachment
EN 361, EN 394, EN 399 SOLAS APPROVED

Weight: 1 lb

+

The PBH08 Harness takes our best selling PBH02 full body harness and incorporates a SOLAS approved 150N or 275N floatation device for working at sea, off shore, on water ways or near water hazards. The Vantage harness is lightweight, easy to don with four points of adjustment to ensure a better fit. Manufactured with stainless steel fittings, this harness is suitable for Fall Arrest via the rear ‘D’ connection and front ‘D’.

  • Attachment Points: Rear D fall arrest attachment point (Dorsal)
    Front D fall arrest attachment point (Chest)
  •  Fittings: Stainless steel
  •  Webbing: Polyester webbing, water repellent & uv resistant
  •  User Weight: 150kg Maximum [Including tools and equipment]

The PBH08 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall.

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted but is primarily for work positioning.

For fall arrest the PBH08 must only be used in conjunction with an energy absorber or load limiting device with a maximum impact force 6kN.

When used for fall arrest a pre-determined rescue plan must be a part of your safe system of work.

Recommended minimum anchor strength – 12kN.

  • Fall Indicating Tabs
  • Label Pouch / Back Support
  • Leg Loops

TDS-11-PBH08-IS4-3

ATTACHMENT POINTS

The front and rear “D” rings are safe to connect to any EN compliant fall protection system.

TDS-04-PBH01-IS5-4

REINFORCED WEBBING

Potential stress points are reinforced to ensure an extra level of safety and durability.

TDS-11-PBH08-IS4-5

LABEL POUCH

All individual Harness information is kept securely inside the label pouch for easy reference.

TDS-11-PBH08-IS4-6

STAINLESS STEEL

Stainless steel fittings ensure durability in arduous environments like a salt laden atmosphere.

TDS-11-PBH08-IS4-8

CONTRAST STITCHING

Contrast stitching is used for easy inspection, prior to donning

TDS-11-PBH08-IS4-7

SOLAS APPROVED

150N or 275N buoyancy for different types of water hazard.

SOLAS Life Jacket
Sternum Fall Arrest Attachment
Life Jacket Securing Strap
Dorsal Fall Arrest Attachment
EN 361, EN 394, EN 399 SOLAS APPROVED