Protection
tds-09-pbh6-is4-2
Move your mouse over image or click to enlarge
tds-09-pbh6-is4-2 tds-09-pbh6-is4-15
The PBH06 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall. The extended rear D provides secondary connection for rescue purposes only. Anchorage: Rear D dorsal attachment pointSternu ...Read more

Two Point Rescue Harness

  • Contrast Stitching
  • Front “D”
  • Two Color Body to Leg Webbing
  • Rear “D”
  • EN361, EN 1497 : 2007

Part #:

PBH06

Contrast Stitching
Front “D”
Two Color Body to Leg Webbing
Rear “D”
EN361, EN 1497 : 2007

Weight: 1 lb

+

The PBH06 is designed to support the body and distribute the forces to prevent serious injury and keep the worker in a safe position ready for rescue in the event of a fall. The extended rear D provides secondary connection for rescue purposes only.

  • Anchorage: Rear D dorsal attachment point
    Sternum attachment point
  •  Fittings: Carbon Steel, Black Powder-Coated
  •  Webbing: Polyester Webbing, Water Repellent & UV Resistant
  •  User Weight: 150kg Maximum [Including tools and equipment]

Certified fall arrest points are clearly marked with an A, the rear “D” should always be your primary anchorage, although front “D” connection is permitted for fall arrest but is primarily for work positioning. The extender D is for rescue only.

The PBH06 must be used in conjunction with an energy absorber or load limiting device.

Maximum impact force 6kN.

When used for fall arrest a pre-determined rescue plan must be a part of your safe system of work.

Recommended anchorage strength 12kN.

  • Rescue Strop
  • Back Support & Label Pouch

TDS-09-PBH6-IS4-3

RESCUE STROP

The rear of the PBH 6 incorporates an integral rescue lanyard sewn to the adjustable rear “D” connection.

TDS-04-PBH01-IS5-7

FALL ARREST INDICATOR

Fall arrest indicating tabs allow the user to easily and confidently determine if the harness has been subjected to fall forces.

TDS-09-PBH6-IS4-5

TRAPEZOIDAL BUCKLES

Angled buckles ensure the harness webbing follows the contours of the body for a more secure and comfortable fit.

TDS-04-PBH01-IS5-4

REINFORCED WEBBING

Potential stress points are reinforced for an extra level of safety and durability.

TDS-09-PBH6-IS4-7

CONTRAST STITCHING

Grey contrast stitching is used so that on inspection, prior to donning, the user can determine the integrity of the harness.

Contrast Stitching
Front “D”
Two Color Body to Leg Webbing
Rear “D”
EN361, EN 1497 : 2007